Winddisplay LED-Schiff

Order No.
4.3251.00.000	Operating voltage		230 V / 50 Hz; 24 V AC 12 V-35 V DC
4.3251.01.000			115 V / 50 Hz; 24 V AC 12 V-35 V DC
	Display range Wind velocity		0-99,9 / 0-999 m/s / kt / km/h / Bft
	Display range Direction		0-360°
	Resolution Wind speed		0,1 / 1
	Resolution Wind direction		5°
	Wind transmitter input	WS	0-1600 Hz
		WD	Thies-serial synchronous
	or WD + WS		Serial data telegram via RS 422
	Interface		RS 422
	Data telegram		LED-Standard, Ultrasonic, NMEA 0, NMEA 1
	Connection		Screw terminal
	Ambient temp.		-10 ... +50 °C
	Model		Switch panel mounting
	Protection		IP 23
	Dimensions		144 x 144 x 135 mm
	Weight		1,5 kg

Wind Display LED
- Ship version - Winddisplay

Digital display instrument which indicates the wind speed and wind direction.
Indicates the wind direction in a circle of 72 LED luminous bars, and the speed by 7-segment- LEDs.
Ship version with direction circle divided in red and green LED’s according to port side and starboard.

Display of WS:
• instantaneous value

Display options of the WD:
• instantaneous value or delayed
or
• instantaneous value and variation
or
• delayed and variation

The version 4.3251.xx.001 and .002 has the additional opportunity to display and transmit via serial interface the values “True” or “Rel” . Wherby the “Rel.” wind are the displayed sensor values. The NMEA datas from any compass system (Gyro,and log) will computed together with the wind sensor values to the “True” Wind and transmitted via the RS 422 Interface. The selection to indicate on the display “True” or “Rel.” wind can be done via the front side mode switch.
A built-in RS-422-interface facilitates the connection of other wind indicators LED.
Suitable wind transmitters:

Wind Display LED
- Ship version -

For the connection of wind transmitter pairs with analogue output values.
Further description please refer to 4.3251.0x.000

Wind Display LED
- Ship version -

Compared with instrument 4.3251.xx.001 this instrument is equipped with an additional analogue-interface and a baro transmitter. This allows the connection of additional measuring value transmitters for rel. humidity and temperature. The measuring values of the temperature, rel. humidity, and air pressure are output serially. The parameters are not displayed.

4.3251.xx.002	Equipment	1 x wind interface, 6 x RS422 in- and output interface, 1 x (for temperature/ rel. humidity analogue interface
For other technical data please refer to 4.3251.xx.001

4.3303.22.000 / 008	4.3351.00(10).000
4.3125.32.100	4.3150.00.000
4.3336.31.001	4.3820.xx.xxx

Order No.
4.3251.0x.1xx
.00.1xx	Operating voltage	230 V / 50 Hz 24 V AC 12 V-35 V DC
.01.1xx		115 V / 50 Hz 24 V AC 12 V-35 V DC
.140	Measuring value input	0 … 20 mA
.141		4 … 20 mA
.161		0 ... 10 V