Wind Transmitter compact
Part number: 4.3619.40.000
-
• low power
• frequency output
• 60 W heating
Measuring transmitter for the measurement of the horizontal wind velocity with frequency output (active signal). Suitable for data loggers.
The cup-star consists of plastic, the housing is made of anodised aluminium and plastic. The instrument has a threaded pin PG 21 with 2 nuts for mounting.
For the more difficult use in the high mountains or at other critical sites, where icing might be expected frequently, the wind transmitters can be equipped with a reinforced heating.
Please contact us for the required model, order-no.,
and availability.
-
Operating voltage |
Heating | 24 V AC/DC, max 60 W |
General |
Electr. connection | 12 m cable, LiyCY
5 x 0.5 mm² |
Dimension | Ø 135 x 165 mm |
Weight | 0.75 kg |
-
No other versions of this product are available.
-
Product
Product name
Product name / Brief description
Traverse compact for wall mounting
For storefront mounting of a measuring value transmitter. Traverse for Wind Transmitters Compact
For mounting the wind transmitter and wind direction transmitter jointly onto a mast.
Material |
Traverse | aluminium (AlMgSi0.5) |
Gripping clamb | stainless steel |
General |
Sensor distance horizontal | 0.8 m |
Weight | 0.35 kg |
Mounting | hole Ø 29 mm |
Traverse short for Wind Transmitters Compact
For mounting one wind transmitter or wind direction transmitter at a mast.
Material |
Traverse | aluminium (AlMgSi0.5) |
Gripping clamb | stainless steel |
General |
Sensor distance horizontal | 0.4 m |
Weight | 0.3 kg |
Mounting | hole Ø 29 mm |
Holder compact
The holder serves for the mounting of a wind transmitter, Compact-type, onto an instrument carrier or mast.
General |
Mounting | for mast tubes Ø 35 ... 50 mm |
Material | stainless steel (V2A) |
Dimension | 80 x 150 mm |
Weight | 0.35 kg |
Mounting | hole Ø 32.5 mm |
-
• low power
4.3171.2x.000
4.3171.3x.000
4.3171.4x.000