Close window

Clima Sensor D

Part number: 4.91xx.00.061

  • Description

    4.9110.00.061
    The Clima Sensor D serves for the measurement of environmental data

    Models are available to measure:
    • Wind speed
    • Precipitation
    • Brigthness
    • Twilight
    • Air Temperature
    • rel. Humidity
     
    These are available as
    • Serial RS 485/­422
    telegram and as
    • Analogue outputs
    for further processing
    The CLIMA Sensor D has an internal DCF77 receiver, which takes the time signal of an atomic clock, and integrates it into the data telegram.
    Ranges of application are:
    • Building control systems
    • Control technique
    • Green house technique
    • Processing of the acquired
    data to recording or display instruments.
    Depending on the model, the following data can be measured by the Clima Sensor D:
    • Wind velocity
    • Precipitation (yes/­no)
    • Brightness in Eastern, Southern and Western direction
    • Twilight
    • Temperature
    • Rel. humidity
    The respective holder serves for the mounting at masts or plane surfaces, depending on the range of application. Instrument with internal condensation shield

  • Specification

    Precipitation
    Measuring range general
    yes /­ no
    Switch-off-delay
    approx. 2 min
    Sensitivity
    fine drizzle
    Brightness
    Measuring range
    0 ... 150 kLux
    Spectral range
    700 ... 1050 nm
    Accuracy
    ±10 % vom rel. Messwert
    Measured directions
    South, East, West
    Twilight
    Measuring range
    0 ... 250 Lux
    Spectrum range
    700 ... 1050 nm
    Accuracy
    ±10 % of meas. value
    Data output digital
    Interface
    RS485 /­ RS422
    Baudrate
    1200 ... 19200 Baud
    Duplex mode
    Full /­ halfduplex
    Protocol
    ASCII
    Parameter
    environmental data,
    housing temperature,
    date /­ time,
    sensor status,
    checksum
    Data output analog
    Type
    max. 8 x 0 ... 10V
    ( incl. Precipitation: 0 or 10 V )
    Voltage output
    min. 10 kê
    General
    Power supply
    16 ... 28V DC or
    16 ... 24 V AC, max. 150 mA
    Current consumpt.
    600 mA
    Electr. connection
    10 m cable,
    LiYCY 16 x 0.14 mm²,
    UV - resistant
    Mounting
    Wall or mast mounting,
    retaining clamb,
    stainless steel
    Weight
    1.5 kg

  • Versions

     
    4.9110.00.061
    Product number 4.9101.00.061
    General
    Dimension
    Ø 130 x 215 mm
    Weight
    1.5 kg
    Product number 4.9110.00.061
    Wind speed
    Measuring range
    1 ... 40 m/­s
    Accuracy
    ±0.5 m/­s or
    ±5 % of meas. range
    Temperature
    Measuring range
    -20 ... +60 °C
    Accuracy
    ±0,5 K @ WS > 2.5 m/­s
    Meas. element
    Pt 100 acc. to DIN IEC 60751 1/­3 class B
    Rel. Humidity
    Measuring range
    0 ... 100 % rel. h.
    Accuracy
    ± 3% rel. h. ( @ 10 ... 90 % rel. h. and WS > 2.5 m/­s )
    General
    Dimension
    Ø 130 x 430 mm
    Weight
    1.5 kg
    Product number 4.9111.00.061
    Temperature
    Measuring range
    -20 ... +60 °C
    Accuracy
    ±0,5 K @ WS > 2.5 m/­s
    Meas. element
    Pt 100 acc. to DIN IEC 60751 1/­3 class B
    Rel. Humidity
    Measuring range
    0 ... 100 % rel. h.
    Accuracy
    ± 3% rel. h. ( @ 10 ... 90 % rel. h. and WS > 2.5 m/­s )
    General
    Dimension
    Ø 130 x 310 mm
    Weight
    1.5 kg
    Product number 4.9100.00.061
    Wind speed
    Measuring range
    1 ... 40 m/­s
    Accuracy
    ±0.5 m/­s or
    ±5 % of meas. range
    General
    Dimension
    Ø 130 x 335 mm
    Weight
    1.5 kg

  • Accessories

    No accessories are available for this product.

  • Further information

     
     
    Catalogs
     
Create all information as a PDF file
Privacy settings
This website uses cookies. Some of them are necessary, while others help us to improve this website and your experience.
I agree and can revoke or change my consent at any time with effect for the future.
Imprint  |  Privacy statement