Wind Transmitter compact
Part number: 4.3520.00.000
-
• Sensor with frequency output and "Open collector source"
Measuring transmitter for the measurement of the horizontal wind velocity with frequency output (active signal). Suitable for data loggers.
The cup-star consists of plastic, the housing is made of anodised aluminium and plastic. The instrument has a threaded pin PG 21 with 2 nuts for mounting.
-
Wind speed |
Measuring range | 0.5 ... 50 m/s |
Resolution | < 0.1 m/s |
Accuracy | ±3 % of meas. value or ± 0.5 m/s |
Data output digital |
Frequency | 2 ... 573 Hz |
Operating voltage |
Electronic | 10 ... 28 V DC |
Current consumption | 20 mA |
Heating | 24 V AC/DC, max 20 W |
General |
Ambient temp. | -40 ... +70 °C |
Electr. connection | 5 m cable, LiyCY
5 x 0.25 mm² |
Protection | IP 55 |
Dimension | Ø 135 x 165 mm |
Weight | 0.75 kg |
-
No other versions of this product are available.
-
Product
Product name
Product name / Brief description
Traverse compact for wall mounting
For storefront mounting of a measuring value transmitter. Traverse for Wind Transmitters Compact
For mounting the wind transmitter and wind direction transmitter jointly onto a mast.
Material |
Traverse | aluminium (AlMgSi0.5) |
Gripping clamb | stainless steel |
General |
Sensor distance horizontal | 0.8 m |
Weight | 0.35 kg |
Mounting | hole Ø 29 mm |
Traverse short for Wind Transmitters Compact
For mounting one wind transmitter or wind direction transmitter at a mast.
Material |
Traverse | aluminium (AlMgSi0.5) |
Gripping clamb | stainless steel |
General |
Sensor distance horizontal | 0.4 m |
Weight | 0.3 kg |
Mounting | hole Ø 29 mm |
Holder compact
The holder serves for the mounting of a wind transmitter, Compact-type, onto an instrument carrier or mast.
General |
Mounting | for mast tubes Ø 35 ... 50 mm |
Material | stainless steel (V2A) |
Dimension | 80 x 150 mm |
Weight | 0.35 kg |
Mounting | hole Ø 32.5 mm |
-
• Sensor with frequency output and "Open collector source"
4.3171.2x.000
4.3171.3x.000
4.3171.4x.000