Precipitation Transmitter
Part number: 5.4033.35.0xx
-
with
• analogue output
• pulse output
• with intensity-dependent linearization
• heating
Instrument serves as sensor for quantity and intensity of precipitation, for the analogue transmission of measuring values.
The precipitation is conducted into the tipping bucket via the collecting area and funnel. On achieving the maximum volume capacity the bucket tips over. Each tipping event is acquired contract-free, is linearized, and output for further processing.
Analogue output:
The following output functions are selectable:
1.) The analogue output is available as accumulated value in proportion to the precipitation
pulses. Here, the analogue value is reset automatically to zero mm precipitation in case of measuring value exceeding, or through an external pulse.
2.) The analogue output can deliver the data as gliding accumulated value over a selectable time (10 / 60 min., 6 / 24 h ).
Pulse output:
The precipitation pulse is available in parallel to the analogue output via an optocoupler
-
Precipitation |
Collecting area | 200 cm² |
Resolution | 0.1 mm |
Meas. principle | tipping buccket |
Intensity | max. 11 mm / min |
Data output digital |
Output type | pulses |
Data output analog |
Meas. range | 10 / 20 / 25 / 50 mm prec. |
Operating voltage |
Electronic | 5 ... 24 V DC |
Heating | 24 V AC/DC, 48.5 W |
General |
Mounting | on mast tube Ø 1,5`` |
Dimension | Ø 186 x 445 mm |
Weight | 3.3 kg |
Matirial housing | stainless steel |
-
Product number 5.4033.35.040
Data output analog |
Type | 0 ... 20 mA |
Stromausgang | max. 500 ê |
Product number 5.4033.35.041
Data output analog |
Type | 4 ... 20 mA |
Stromausgang | max. 500 ê |
Product number 5.4033.35.061
Data output analog |
Type | 0 ... 10 V |
Product number 5.4033.35.073
Data output analog |
Type | 0 ... 5 V |
-
Product
Product name
Product name / Brief description
Device to Refuse Birds
Protection against bird drop-pings for the collecting funnels of the Ombrometer (5.4032.35.007 / 008; 5.4033.35 / 36 ...).
Refuses birds on the edge of the collecting funnel.
General |
Mounting | Clamping diameter Ø 186 mm |
Material | stainless steel |
Dimension | Ø 360 x 100 mm |
Weight | 0.32 kg |
Wind Protection Element
Serves as optional accessory for uninterrupted acquisition even in case of wind.
Material |
Frame | stell, zinc plated |
Laminations | stainless steel |
General |
Height | 800 mm |
Diameter | 1000 mm |
Weight | 18 kg |
Mounting | Ø 48 mm |
Power Supply Unit
Provides power, for Ombrometer and Precipitation Transmitter.
primary:
• 230 V AC
secundary:
• 26 V AC / 3.46 A
• 24 V AC / 0.5 A
• 12 V DC / 0.3 A
Operating voltage |
Primary | 230 V AC / 50 ... 60 Hz |
Secundary | 26 V AC / 3.46 A 24 V AC / 0.5 A 12 V DC / 0.3 A |
General |
Protection | IP 65 |
Dimension | 125 x 125 x 125 mm |
Weight | 2.7 kg |
Matirial housing | Synthetic |
Power supply Unit
For the power supply of wind speed transmitters, wind direction transmitters or combined instruments.
primary:
• 230 V AC
secundary:
• 2 x 24 V AC / 27.5 W
• 1 x 24 V AC / 75 W
• 1 x 24 V AC / 5 W
• 1 x 24 V DC / 2 W
Operating voltage |
Primary | 230 V AC / 50 Hz / 0.63A |
Secundary | 2 x 24 V AC / 27.5 W 1 x 24 V AC / 75 W 1 x 24 V AC / 5 W 1 x 24 V DC / 2 W |
Electrical connection |
Series terminals | 20 |
Cable gland | 5 x M16x1.5 2 x M20x1.5 |
General |
Housing | plastic |
Protection | IP 65 |
Dimension | 300 x 230 x 132 mm |
Weight | approx. 4.2 kg |
Power supply Unit
For the power supply of wind speed transmitters, wind direction transmitters or combined instruments.
primary:
• 115 V AC
secundary:
• 2 x 24 V AC / 27.5 W
• 1 x 24 V AC / 75 W
• 1 x 24 V AC / 5 W
• 1 x 24 V DC / 2 W
Operating voltage |
Primary | 115 V AC / 50 ... 60 Hz / 1.3A |
Secundary | 2 x 24 V AC / 27.5 W 1 x 24 V AC / 75 W 1 x 24 V AC / 5 W 1 x 24 V DC / 2 W |
Electrical connection |
Series terminals | 20 |
Cable gland | 5 x M16 x1.5 2 x M20 x1.5 |
General |
Housing | plastic |
Protection | IP 65 |
Dimension | 300 x 230 x 132 mm |
Weight | approx. 4.2 kg |
Stand
Used to mount the preceding Ombrometer, resp. Precipitation Transmitter. The collecting
area can be elevated to a height of 1; 1.2 or 1.5 m.
General |
Material | steel, zinc plated |
Tube diameter | Ø 48.3 mm |
Mounting distance | 450 mm |
Stand
Used to mount the preceding Ombrometer, resp. Precipitation Transmitter. The collecting
area can be elevated to a height of 1; 1.2 or 1.5 m. Material is stainless steel
General |
Material | stainless steel |
Tube diameter | Ø 48.3 mm |
Mounting distance | 450 mm |
-