Air humidity measuring technology Hygro-Thermo-Baro Transmitter Compact

  • Description
  • Specification
  • Versions
  • Accessories
  • Further information
  • PDF
Part number: 1.1006.54.xxx
This sensor is above all intended for use at meteorological measuring stations for connection to data logger systems. Thanks to its universal interface the sensor can also be used as a single solution in every application suitable for the purpose.

The interface to the device is digital and consists of an RS485 interface in half duplex mode. In conjunction with ID-based communication the interface enables operation of the sensors in a bus system.

Two data protocols are available:
• ASCII (THIES format)
• Binary (MODBUS-RTU)

In addition to the digital interface, the transmitters with article numbers 1.1006.54.x4x and 1.1006.54.x6x have 3 analogue outputs which can be configured as a current or voltage output. The digital output can be used simultaneously with the analogue outputs.

The sensor is equipped with a integrated pressure sensor, as well as a replaceable hygro-thermo module for the capture of air temperature and relative humidity.
The replaceable hygro-thermo-module and the pressure sensor are factory adjusted and cali-brated. The sensor is supplied without a filter cap. The hygro-module is protected with its own white membrane. The sensor thus offers excellent dynamic behaviour. PT1000 measuring element is used for temperature measurement.

For outdoor installation we recommend the use of the weather- and thermal radiation shield.
Order no.: 1.1025.55 xxx or a forced ventilation weather and radiation protection with the order no. 1.1025.80.101.
1.1006.54.xxx

Specification


Part number: 1.1006.54.xxx
 
1.1006.54.xxx
Temperature
Measuring range
-40 … +85 °C
Accuracy
± 0.1°C @ -40 ... +85 °C @ moved air > 2 m/s
Rel. Humidity
Measuring range
0 … 100 % rel. Humidity
Accuracy
Typ. ± 1,5 % r. H. @ 25 °C and < 80 % r. H.
1,5 % r. H. over the complete measuring range
Air pressure
Measuring range
300 … 1200 hPa
Accuracy
± 0.25 hPa @ -20 … +80°C @ 800 … 1100 hPa
± 0.50 hPa @ -20 … +80°C @ 600 … 800 hPa
Interface
Type
RS 485 HD
Output
RS 485 HD; 0 ... 1 V; 0 ... 10 V; 4 ... 20 mA
Data format
8N1
Baud rate
2400 ... 57600 Baud
Operating voltage
Battery connection
6 ... 30 V DC - type dependent
General
Ambient conditions
-40 ... +85 °C
0 ... 100 rel. humidity, including condensation
Current load
type dependent
Housing
Stainless steel
Protection
IP 67 (applies to the total sensor)
Dimension
Ø 20 x 166 ... 200 mm - type dependent
Weight
aprox. 0.45 kg

Versions


As per 1.1006.54.xxx, but:
 
1.1006.54.xxx
Product number 1.1006.54.080
Data output digital
Electr. output
THIES ASCII
Operating voltage
Electronic
6 ... 30 V DC
General
Electr. connection
5m - Cable
Product number 1.1006.54.081
Data output digital
Electr. output
MODBUS RTU
Operating voltage
Electronic
6 ... 30 V DC
General
Electr. connection
5m - Cable
Product number 1.1006.54.161
Data output digital
Electr. output
THIES ASCII
Data output analog
Chanels
3
Type
0 ... 10 V
Operating voltage
Electronic
15 ... 30 V DC
General
Electr. connection
5m - Cable
Product number 1.1006.54.780
Data output digital
Electr. output
THIES ASCII
Operating voltage
Electronic
6 ... 30 V DC
General
Electr. connection
Plug
Product number 1.1006.54.781
Data output digital
Electr. output
MODBUS RTU
Operating voltage
Electronic
6 … 30 V DC
General
Electr. connection
Plug
Product number 1.1006.54.141
Data output digital
Electr. output
THIES ASCII
Data output analog
Chanels
3
Type
4 ... 20 mA
Operating voltage
Electronic
15 ... 30 V DC
General
Electr. connection
5m - Cable
Product number 1.1006.54.160
Data output digital
Electr. output
THIES ASCII
Data output analog
Chanels
3
Type
0 ... 1 V
Operating voltage
Electronic
6 ... 30 V DC
General
Electr. connection
5m - Cable
Product number 1.1006.54.741
Data output digital
Electr. output
THIES ASCII
Data output analog
Chanels
3
Type
4 ... 20 mA
Operating voltage
Electronic
15 ... 30 V DC
General
Electr. connection
Plug
Product number 1.1006.54.761
Data output digital
Electr. output
THIES ASCII
Data output analog
Chanels
3
Type
0 ... 10 V
Operating voltage
Electronic
15 ... 30 V DC
General
Electr. connection
Plug
Product number 1.1006.54.760
Data output digital
Electr. output
THIES ASCII
Data output analog
Chanels
3
Type
0 ... 1 V
Operating voltage
Electronic
6 … 30 V DC
General
Electr. connection
Plug

Accessories

 
Product
Product name
Product name / Brief description
1.1005.54.903

Wall Holder

1.1005.54.903

Wall Holder


for mounting the temperature ( 2.1280.xx.xxx ) or hygrothermo Sensor ( 1.1005..xx.xxx ) onto a wall, radiation- and precipitationprotected use (for ex. indoor)
 
General
Clamping range
Ø 20 mm
Mounting
plate with with drillings 3 x Ø 6,5 mm
Material
plastic, grey flange
Dimension
96 mm lang
Weight
0.075 kg
1.1025.55.000

Weather and Thermal Radiation Shield, compact

1.1025.55.000

Weather and Thermal Radiation Shield, compact


Protective case for the temperature and humidity sensors ( 2.1280.xx.xxx and 1.1005.54.xxx )sensor compact for outdoor installation without artificial ventilation.
 
Material
Laminations
plastic, white
Mast holder
stainless stell
General
Mounting
at tube Ø 35 ... 50 mm
Dimension
Ø 120 x 275 mm
Weight
0.8 kg
1.1025.55.000

Weather and Thermal Radiation Shield, compact

1.1025.80.101

Weather and Thermal Radiation Shield, compact


Protective case for the temperature and humidity sensors ( 2.1280.xx.xxx, 1.1005.54.xxx and 1.1006.54.xxx) sensor compact for outdoor installation without artificial ventilation.
 
noimg

Calibration hose connection adapter HTB-Transmitter

510025

Calibration hose connection adapter HTB-Transmitter


Calibration hose connection adapter HTB-Transmitter Compact
 
noimg

Replacement hygro-thermo measuring element

510307

Replacement hygro-thermo measuring element


Calibrated replacement measuring element for exchange
 
noimg

Sinter-filter-Cap

510314

Sinter-filter-Cap


The filter serves for protecting the sensor elements of the Hy-gro-thermo transmitter against dust in case of field application
 
noimg

Protective cap

510448

Protective cap


The protective cap is used to protect the measuring elements of the Hygro-Thermo-BaroSensor from damage.
 

Further information

 
 
 
User manual
User manual 1.1006.54.xxx H-T-B Sensor compactShort manual 1.1006.54.xxx H-T-B Sensor compactQuickstart Site Planning
 
Prospect
Prospect 1.1006.54.xxx
 
Catalogs
Catalog WindCatalog PrecipitationCatalog RadiationCatalog Temperature, Pressure, Humidity
 

Contact
Phone: +49 551 / 79001-0
Fax: +49 551 / 79001-65
info@thiesclima.com

Inquiry / Message

Please use the form below for your inquiry or message.
 
 
Hygro-Thermo-Baro Transmitter Compact (1.1006.54.xxx)
THE WORLD OF WEATHER DATA
Air-humidity-measuring-technologyPrecipitation-measuring-technologyWind-measuring-technologyTemperature-measuring-technologyMiscellaneous-DevicesRadiation-measuring-technologyAir-pressure-measuring-technologyParticulate-measurement-technologyCompany

We are Member of:

Adolf Thies GmbH & Co. KG Hauptstraße 76 37083 Göttingen Germany Phone +49 551 / 79001-0 info@thiesclima.com www.thiesclima.com
Privacy settings
This website uses cookies. Some of them are necessary, while others help us to improve this website and your experience.
I agree and can revoke or change my consent at any time with effect for the future.